Less Wiring, More Control in Commercial Projects by TIS Control
Commercial projects settings such as shopping malls, restaurants, and hotels use a lot of light fixtures to look bright or attractive.It is very important that everything related to lighting be controlled by an operator behind the scenes.
For instance, an area with 180 channels of lights requires at least 180 live wires and a somewhat less numerous controllersor equal number of neutral wires, with located in control room.
Controlling all commercial projects load types with one single system is difficult, if not impossible, job; some lights need to be dimmed.
Another problem is load voltage; some lights work with low current 12/24V DC, while others use direct 110/220V AC.
TIS Control Company
The TIS Control Company proudly offers controlling all types of light and lighting protocol systems with the following products:
- Forwarding and reversing commercial projects dimmers (trailing edge dimmer and leading-edge dimmer)
- Relay switches
- DALI64 Protocol convertor and drivers
- DMX512 Protocol convertor and driver
- 0-10V ballast controller
- LED PWM drivers
- PCS UPB Lighting convertor
- KNX Protocol Convertor
TIS’s wired and wireless solutions enable separate or integrated control of all the aforementioned systems in a single network.The commercial projects by commercial projects by TIS system can support more than 65000 wired and wireless devices in a common network.
Commercial projects by TIS equipment used in projects for the Hilton Tanger City Center Hotel and Residence and the Hilton Garden Inn Tanger City Center to control 180 lights in their lobby areas. The wiring reduced by 80%; TIS-DALI-64 Controller and TIS-BUS topology made the wiring much easier and more efficient. All DALI ballast and light drivers mounted next to the load, and the data cable looped among all the smart components, along with the other by TIS relays and dimmers.
By single Luna TFT wall panel installed next to reception an operator abled to dim all of the 180 lights 80%, 60%, 40%, and 20% to create different scenes with a single press.
TIS DALI and Dimmers used conference rooms of these to control many loads, e.g florescent lights, and more.
The TIS Control Company makes complex lighting projects easy. TIS products also blend elegance with efficiency, bringing the highest quality in performance and attractiveness.