Saturday, December 9, 2023
HomeFeatureHow to Fix a Broken Enamel Pin

How to Fix a Broken Enamel Pin

Whether you’ve got a sentimental enamel pin from your favorite band or a trendy new fashion accessory, there’s nothing worse than seeing it become damaged.

While it may seem like the end of the world when your enamel pin breaks, there’s no need to despair. In most cases, it’s quite simple to fix a broken enamel pin with a few household items.

In this blog post, we’ll show you how to fix a broken enamel pin with ease. We’ll also give you some tips on how to avoid damaging your pins in the future.

What to do if your enamel pin breaks

If you’re lucky, the back of your enamel pin will have a metal clasp that you can use to reattach the pin. If not, you can try using a strong glue like superglue or epoxy.

However, if your enamel pin is severely damaged, it might not be possible to repair it. In this case, you’ll need to purchase a new one. But don’t despair – there are plenty of wonderful pins out there to choose from!

How to fix a broken enamel pin

If you find yourself with a broken enamel pin, there is no need to despair. With a few simple tools, you can fix your pin and get back to showing your style.

The tools and materials you’ll need

Before you start, gather the following materials:

  • A broken enamel pin
  • Super glue
  • Cleaning alcohol
  • Cotton Swab
  • A Toothpick
  • A paint brush

If the pin is missing any small pieces, try to find them and set them aside;

Step-by-step Instructions for Fixing a Broken Enamel Pin

Once you have your supplies, you can now begin with the procedure.

  • Start by cleaning the area around the break with alcohol. This will help to remove any dirt or oil that could prevent the glue from adhering properly.
  • Next, use the paintbrush to apply a thin layer of super glue to the back of the enamel pin. Be careful not to get any glue on the front of the pin, as this will be visible once it dries.
  • Once you have glued the piece back in place, use the toothpick to carefully apply pressure until the glue sets.

Finally, allow the pin to dry for 24 hours before wearing it again

Tips for Preventing Your Pins From Breaking in the First Place

To save yourself time and hassle, it’s important to take steps to prevent your pins from breaking in the first place. Here are a few tips:

  1. Use high-quality materials:

Cheap pins are more likely to break than those made from sturdy materials.

  1. Avoid sharp bends:

Pins that are bent at sharp angles are more likely to snap. Be careful not to over-bend your pins when you’re putting them in or taking them out.

  1. Keep them clean:

Dirty pins are more likely to break than clean ones. When you’re not wearing your pins, store them in a safe place where they won’t get scratched or dirty.

  1. Inspect them regularly:

Inspect your pins every few weeks to make sure they’re not bent or damaged in any way. If you see any damage, stop wearing the pin until you can fix it or replace it.

  1. Handle with care:

Don’t throw your pins around or step on them accidentally. Avoid putting them in places where they could get caught on something or pulled out forcefully.

By following these tips, you can help prevent your pins from breaking in the first place. But even if you do everything right, accidents can still happen.

Where to Buy New Enamel Pin If Your’s is Broken

One of the easiest places to buy a new enamel pin is online. There are dozens of websites that sell pins, and you’re sure to find one that sells the type of pin you’re looking for.

Another option is to visit your local jewelry store. Many jewelry stores sell enamel pins, and they may even have a few in stock that match your existing pin.

Finally, you can always try to find a replacement pin at a flea market or antique shop. With a little bit of luck, you’ll be able to find an exact match for your broken pin.

However, if you still don’t find a pin that looks just like the one you need to replace, don’t worry. You can always opt to design your own enamel pin. This way, you can create a one-of-a-kind pin that perfectly represents your unique style.


Q: What is the best way to store enamel pins?

A: The best way to store enamel pins is in a cool, dry place. Avoid storing them in direct sunlight or humid environments, as this can cause the metal to tarnish. If you’re not going to be wearing your pins for a while, consider storing them in a zip-top bag or other airtight containers.

Q: Is it possible to repair a bent enamel pin?

A: Yes, it is possible to repair a bent enamel pin. However, depending on the severity of the bend, it may be easier to simply replace the pin. If the pin is only slightly bent, you can try straightening it with pliers. If the bend is more severe, you may need to use a hammer to straighten it out.

Q: I accidentally dropped my enamel pin and the enamel cracked. Is there anything I can do to fix it?

A: Unfortunately, once the enamel on an enamel pin cracks, it’s impossible to repair. You’ll need to replace the pin with a new one.

Wrap Up

 So, there you have it! Everything you need to know about fixing a broken enamel pin. We hope this was helpful and that you are now able to fix your pins with ease.

If you have any questions or run into any problems, feel free to reach out to us for help. We’d be happy to assist you in any way we can. Thanks for reading!

Abubakar is a writer and digital marketing expert. Who has founded multiple blogs and successful businesses in the fields of digital marketing, software development. A full-service digital media agency that partners with clients to boost their business outcomes.

Most Popular

Recent Comments